Products

Free sample for Epe Seal Liners - Two-Piece Heat Induction Seal Liner With “A Structure” – Ziling Packaging

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Assume full accountability to satisfy all demands of our consumers; reach ongoing advancements by endorsing the expansion of our purchasers; come to be the final permanent cooperative partner of clients and maximize the interests of clientele for Polyethylene Foam Sealing Liner, PET Aluminum Foil Seals, Aluminum Foil Induction Seal, Special emphasis around the packaging of merchandise to avoid any damage during transportation,Detailed interest into the useful feedback and strategies of our esteemed shoppers.
Free sample for Epe Seal Liners - Two-Piece Heat Induction Seal Liner With “A Structure” – Ziling Packaging Detail:

Two-piece Heat Induction Seal Liner with A Structure

This liner is made up of aluminum foil layer and backup layer. It needs the induction seal machine. After induction machine provides a heat-seal laminate hermetically sealed to the lip of a container, the aluminum layer is sealed on the lip of the container and the secondary layer (cardboard of form) is left in the cap. The secondary liner as the reseal liner is left in the cap after heating process.

Specification

Raw material: Backing Material + Wax + Aluminum Foil + Plastic Film + Sealing Film

Backing Material: Pulp board or Expanded Polyethylene (EPE)

Sealing Layer: PS, PP, PET, EVOH or PE

Standard Thickness: 0.2-1.7mm

Standard Diameter: 9-182mm

We accept customized logo, size, packaging and graphic.

Our products can be die-cut into different shapes and sizes upon request.

Heat sealing temperature: 180℃-250℃, depend on the material of the cup and the environment.

Package: Plastic bags – paper cartons – pallet

MOQ: 10,000.00 pieces

Delivery Time: Fast delivery, within 15-30 days which depends on the order quantity and production arrangement.

Payment: T/T Telegraphic Transfer or L/C Letter of Credit 

Product Features

Aluminum foil is the first layer of whole aluminum foil layer.

The aluminum layer is sealed on the lip of container.

The secondary layer (cardboard of form) is left in the cap.

Suitable for the screw capping PET, PP, PS, PE, high barrier plastic bottles

Good heat sealing.

A wide heat sealing temperature range.

High quality, non-leakage, anti-puncture, high clean, easy & strong sealing.

Barrier of air and moisture.

Long guarantee time.

Benefits

1. Very easy to open

2. Seals in freshness

3. Prevent costly leaks

4. Reduce the risk of tampering, pilferage, and contamination

5. Extend shelf life

6. Create hermetic seals

7. Environment friendly

Factors affecting sealing

Contact width of sealing surface: the larger the contact width between sealing surface and gasket or packing, the longer the path of fluid leakage and the greater the flow resistance loss, which is beneficial to sealing. However, under the same compression force, the larger the contact width, the smaller the specific pressure. Therefore, the appropriate contact width should be found according to the material of the seal.

Fluid properties: the viscosity of the liquid has a great impact on the sealing performance of the packing and gasket. The fluid with high viscosity is easy to seal due to its poor fluidity. The viscosity of liquid is much higher than that of gas, so liquid is easier to seal than gas. Saturated steam is easier to seal than superheated steam because it will condense and precipitate droplets and block the leakage channel between sealing surfaces. The larger the molecular volume of the fluid, the easier it is to be blocked by the narrow sealing gap, so it is easy to seal. The wettability of the liquid on the sealing material also has some influence on the sealing. The liquid which is easy to soak is easy to leak due to the capillary action of the micro pores in the gasket and packing.

1


Product detail pictures:

Free sample for Epe Seal Liners - Two-Piece Heat Induction Seal Liner With “A Structure”  – Ziling Packaging detail pictures


Related Product Guide:

All we do is usually affiliated with our tenet " Buyer to start with, Belief to start with, devoting about the food packaging and environmental defense for Free sample for Epe Seal Liners - Two-Piece Heat Induction Seal Liner With “A Structure” – Ziling Packaging , The product will supply to all over the world, such as: Swiss, Estonia, Ghana, Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.
  • The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
    5 Stars By Mike from luzern - 2017.09.26 12:12
    The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
    5 Stars By Cherry from Norwegian - 2017.06.19 13:51
    Write your message here and send it to us